Antimicrobial peptides

Your Heading Here (maybe something like 'Structure')

spinqualitylabelsall models Show:Asymmetric Unit Biological Assembly Drag the structure with the mouse to rotate   Export Animated Image   Print3D This is a default text for your page Antimicrobial peptides. Click above on edit this page to modify. Be careful with the < and > signs. You may include any references to papers as in: the use of JSmol in Proteopedia or to the article describing Jmol to the rescue. Introduction Antimicrobial Peptides (AMPs) are short peptides that consist of 10-50 amino acids, and were found to have antimicrobial influence on different kinds of bacteria and fungi. They are also called host defense peptides (HDPs) or defensins,Since they have different functions in their host. AMPs are produced by Eukaryotes, as part of their defence mechanism from bacteria. They defend their host from bacteria, and also have physiological functions such as inflammation and wound healing (Wimley 2010) Even though they have similar functions, AMPs lack any specific consensus amino acid sequences that are associated with biological activity. clasiffication Antimicrobial peptides are divided into subgroups on the basis of their amino acid composition and structure (ref nature review). (1)Anionic peptides • Maximin H5 from amphibians. • Small anionic peptides rich in glutamic and aspartic acids from sheep, cattle and humans - they present in surfactant extracts, bronchoalveolar lavage fluid and airway epithelial cells. They are produced in mM concentrations, require zinc as a cofactor for antimicrobial activity and are active against both Gram positive and Gram-negative bacteria. • Dermcidin from humans147. (2) Linear cationic α-helical peptides - contains ~290 cationic peptides, which are short (contain <40 amino acid residues), lack cysteine residues and sometimes have a hinge or ‘kink’ in the middle In aqueous solutions many of these peptides are disordered, but in the presence of trifluoroethanol,sodium dodecyl sulphate (SDS) micelles, phospholipid vesicles and liposomes, or Lipid A, all or part of the molecule is converted to an α-helix. It has been observed for buforin II, and LL-37, that the extent of α-helicity correlates with the antibacterial activity against both Gram-positive and Gram-negative bacteria — increased α-helical content correlates with stronger antimicrobial activitie • Cecropins (A), andropin,moricin, ceratotoxin and melittin from insects. • Cecropin P1 from Ascaris nematodes148. • Magainin (2) (Magainin 2 in proteopedia), dermaseptin, bombinin, brevinin-1, esculentins and buforin II from amphibians. • Pleurocidin from skin mucous secretions of the winter flounder. • Seminalplasmin,BMAP,SMAP (SMAP29,ovispirin), PMAP from cattle, sheep and pigs. • CAP18 from rabbits. • LL37 from human - In water, it exhibits a circular dichroism (CD) spectrum that is consistent with a disordered structure.However, in 15 mM HCO3–, SO42– or CF3CO2–, the peptide adopts a helical structure. (3) Cationic peptides enriched for specific amino acids - contains ~44 cationic peptides that are rich in certain amino acids. These peptides lack cysteine residues and are linear, although some can form extended coilsץ • Proline-containing peptides include abaecin from honeybees. • Proline- and arginine-containing peptides include apidaecins from honeybees; drosocin from Drosophila; pyrrhocoricin from the European sap-sucking bug; bactenecins from cattle (Bac7), sheep, and goats; and PR-39 from pigs. • Proline- and phenylalanine-containing peptides include prophenin from pigs. • Glycine-containing peptides include hymenoptaecin from honeybees. • Glycine- and proline-containing peptides include coleoptericin and holotricin from beetles28. • Tryptophan-containing peptides include indolicidin from cattle. • Small histidine-rich salivary polypeptides, including the histatins from man and some higher primates116. (4) Anionic and cationic peptides that contain cysteine and form disulphide bonds - this group has ~380 members, contain cysteine residues and form disulphide bonds and stable β-sheets. A diverse family of defensins (defensin in proteopeia) is belong to this group. There are ~55 α-defensins, which include human neutrophil peptides (HNPs) and cryptdins and comprise 29–35 amino acid residues, including six cysteines that are linked by three intramolecular disulphide bonds. There are ~90 β-defensins from both humans (HBDs) and animals that comprise 36–42 amino acid residues including six cysteines that are linked by three intramolecular disulphide bonds. In addition, there are ~54 arthropod (insect) defensins, ~58 plant defensins and a rhesus θ-defensin (RTD-1), which is an 18-residue peptide that forms a circular molecule that is crosslinked by three disulphide bonds. SPAG11/isoform HE2C is an atypical anionic β-defensin-like peptide. • Peptides with 1 disulphide bond include brevinins. • Peptides with 2 disulphide bonds include protegrin from pigs and tachyplesins from horseshoe crabs. protegrin is from porcine leukocytes (which comprises 16 amino acid residues, including four cysteines that are linked by two intramolecular disulphide bonds). • Peptides with 3 disulphide bonds include α-defensins from humans (HNP-1,HNP-2,cryptidins), rabbits (NP-1) and rats; β-defensins from humans (HBD1, DEFB118),cattle,mice, rats, pigs, goats and poultry12; and rhesus θ-defensin (RTD-1) from the rhesus monkey. • Insect defensins (defensin A). • SPAG11/isoform HE2C, an atypical anionic β-defensin. • Peptides with >3 disulphide bonds include drosomycin in fruit flies and plant antifungal defensins. (5) Anionic and cationic peptide fragments of larger proteins - these fragments have antimicrobial activity and are similar in composition and structure to the antimicrobial peptides described above. However, their role in innate immunity is not yet clear. • Lactoferricin from lactoferrin (human lactoferrin in proteopedia). • Casocidin I from human casein. • Antimicrobial domains from bovine α-lactalbumin, human haemoglobin, lysozyme (Hen Egg-White (HEW) Lysozyme in proteopedia) and ovalbumin. Structural highlights AMPs are rich with hydrophibic (Ala, Val, Ile, Leu, Met, Phe, Tyr, Trp) and Possitively charged (Lys, Arg) Amino Acids, which seems to allow them to bind into membranes. Protegrin 1, is a peptide from porcine leukocytes and it's sequence is rich with hydrophobic residues and cationic residues. AMPs have a big vareity of structures, and these structures can be divided to a few categories: alpha helix structures, beta sheet structures, and peptides with extended or loop structures. Their structure allow them to interact with negatively charged phospholipid head groups of microbial membranes, resulting in pore formation on the bacterial membrane . Nevertheless, the way different antimicrobial peptides achieve their goal appears to be different, and there are a few suggested mechanisms. AMPs structures As we mentioned earlier, Although AMPs have the same effect on the cell mambrane, they do not seem to have the same structure. we can find a big variety of structures among familiar AMPs. (1) Some have helical structures, for some of the peptide sequence, such as Magainin, (2LSA), or a helical structure throughout the whole peptide, such as Magainin2 (2MAG). this peptide was found on a frogs skin. you can see the page about Magainin2 here : 2mag. (2) Beta-sheet structures: RTD1, A cyclic antimicrobial defencin from Rhesus Macaque leukocytes,has a beta sheet structure, rich with disulfide bonds that strengthen the beta-sheet structure. this peptide is 55% beta sheet (4 strands; 10 residues). Protegrin 1 from porcine leukocytes, NMR, has a hairpin shape 63% beta sheet, 2 strands, 12 residues Protegrins are a family of arginine - and cysteine rich cationic peptides (c) and some have combined structures, like Human beta defencin1 Suggested Mechanisms There are a few suggested machanisms of how AMPs work(William C. Wimley, ACS CHEMICAL BIOLOGY, 2010). They can be divided into two: (A) Transmembrane Pore Models of AMP Membrane Activity and (B) Nonpore Models of AMP Activity In the Transmembrane Pore Models, it is suggested that AMPs form many pores in the mambrane, so that it cannot hold it's content anymore. tha transmembrane pore mechanism has 2 main models: 1- barrel stave pore model ,that claims peptides interact laterally with one another to form a specific structure enclosing a water-filled channel, much like a protein ion channel. 2- toroidal pore model, that claims specific peptide–peptide interactions are not present, and instead, single peptides are bound to the membrane’s phospholipids and disturbe it’s structure.. the Nonepore model claims peptides bind to the membrane until it collapses. It is devided into 2 main mechanisms: 1- The carpet model. In this model, antimicrobial peptides accumulate on the membrane surface with an orientation that is parallel to the membrane.When peptide concentration has reached a critical level permeabilization occurs via global bilayer destabilization. 2- detergent model- collapse of membrane integrity, observed with some AMPs at high peptide concentration. Relevance 4MGP - Ala Mag amino acids division by colors 4mgp_cationic residue 4MGP hydrophobic residues This is a sample scene created with SAT to color by Group, and another to make a transparent representation of the protein. You can make your own scenes on SAT starting from scratch or loading and editing one of these sample scenes.

Proteopedia Page Contributors and Editors (what is this?)

Tal stern, Carmit Ginesin, Michal Harel